Using The Universal Remote Control; Registered External Device Management - Samsung LED 4500 Series E-Manual

Using the Universal Remote Control

By configuring the universal remote control feature for a connector to which an external device is
already connected, you can use the Smart Touch Control as a universal remote control simply by
sending the input signals to the corresponding connector.

Registered External Device Management

Universal remote setup
From the
available:
Source Setup
●
Change the TV's input connector that the external device is connected to.
Synced Power Off
●
Configure the external device to turn off when the TV is turned off.
Rename
●
Rename the registered external device (up to 15 characters long).
Delete
●
Remove the registered external device.
screen, select a registered external device. The following options are