Polaris Personalized Automated Control System Owner's Manual page 21

To set an Access Code:
1. Check the Access Code box. A new screen
will open and request a code.
2. Press any four keys on the keypad, in any
order. Press <Enter> to activate the code.
3. Use the left arrow key to exit the
4. A confirmation screen will appear. Move
cursor to Yes and press <Enter> to
activate the change.
All function selections will lock requiring
input of the access code to make changes.
To reset if the code is forgotten:
1. Press the left and right arrow keys
simultaneously to open the
2. Disable (uncheck) the Access Code box.
3. Press left arrow key to exit the
Move cursor to Yes on the confirmation screen
and press <Enter> to activate the change.
Contrast controls readability of text on screen.
Backlight controls illumination of display screen.
To conserve battery life, set Sleep Timeout to
switch the remote to sleep mode after a specified
length of time without activity.
To save changes made to any settings on the
Wireless Setup screen:
1. Make adjustment, then use the
left arrow key to exit the screen. A
confirmation screen will open.
2. Move curser to Yes and press <Enter>
to activate the change.
To reset the wireless display if it is
locked-up or frozen:
1. Press and hold <Enter>.
2. Press left and right arrow keys simultaneously.
Setup
screen.
Setup
screen.
Setup
screen.
19
Audible Alarm
Spa Temp Notify
Access Code
Contrast Adjust
Backlight Adjust
Sleep Timeout 3 min
Please Enter Your Four
Button Access Code:
Would You Like To Save
Your Changes:
Yes
No
Wireless Remote Setup
Wireless Remote Setup
Software Versions
Software Versions
Network Settings
Network Settings
Shutdown
Shutdown
Audible Alarm
Audible Alarm
Spa Temp Notify
Spa Temp Notify
Access Code
Access Code
Contrast Adjust
Contrast Adjust
Backlight Adjust
Backlight Adjust
Sleep Timeout 3 min
Sleep Timeout 3 min
Would You Like To Save
Would You Like To Save
Your Changes:
Your Changes:
Yes
No
Yes No
E