Polaris Personalized Automated Control System Owner's Manual page 13

Personalized automated control system
Table of Contents

Advertisement

Using Manager Screens
Access any manager screen from the
Heater Manager
An adjustable high and low operating Range is
available for heaters. Defaults are 0° and 104° F.
Range can be used to set multiple heaters to
heat to different temperatures. For example:
two heaters can be set to heat together up to a
certain temperature, such as 95° F, with only
the second continuing to heat to the maximum.
Heater Cool Down is a safety feature that
provides a two-minute delay in turning off the
circulation pump after the heater has completed
its firing cycle. This allows the heater to cool down.
If Freeze Protect is disabled (unchecked), the
Use left/right
heater will not fire during "Freeze Alert." If enabled,
arrow keys to
the heater will fire if the water temperature drops
change screens.
to 34° F or the air temperature drops to 36° F.
Spa Dep Valve Manager
If a Spa Dependent Valve is installed on
the pool, use Spa Mode Position to set the
valve position, open or closed, when
the system is in circulation mode "Spa."
1. Use the arrow keys to move the
cursor over the Spa Mode Position
Off
field. (Ex:
)
2. Press <Enter> to select On or Off.
Use left/right
arrow keys to
change screens.
Solar Valve Manager
Solar Priority, available on the Solar Valve
Manager and Solar Pump Manager screens,
Duration
sets solar heating to have priority over all
04h 00m
other heaters.
Day
When checked (default), the solar heater
off
off
has priority over other heaters until the water
off
temperature gets within 5 degrees of the Solar
off
Panel Temp. Then, solar heating will shut off and
Ranges 0
Heater Cool Down
the other heater(s), if activated, will continue to
Freeze Protect
heat until the setpoint is reached.
Solar Panel Temp displays the current reading
Use left/right
arrow keys to
from the temperature sensor on the solar panel.
change screens.
Main
screen by selecting the folder next to the item.
Manual Control
Remaining
00h 00m
Schedules
Start
Stop
12:00p
12:00p
12:00p
12:00p
12:00p
12:00p
12:00p
12:00p
104
Tue, Aug 03
PS Heater Manager
PS Heater
Manual Control
Duration
Remaining
04h 00m
00h 00m
Schedules
Day
Start
off
12:00p
off
12:00p
off
12:00p
off
12:00p
Range
0
Heater Cool Down
Freeze Protect
Air 60°
Water 71°
Tue, Aug 03
Spa Dep Valve Manager
Spa Dep Valve
Manual Control
Duration
Remaining
04h 00m
00h 00m
Schedules
Day
Start
off
12:00p
off
12:00p
off
12:00p
off
12:00p
Spa Mode Position
Freeze Protect
Air 60°
Water 71°
Tue, Aug 03
Solar Valve Manager
Solar Valve
Manual Control
Duration
Remaining
04h 00m
00h 00m
Schedules
Day
Start
off
12:00p
off
12:00p
off
12:00p
off
12:00p
Solar Priority
Freeze Protect
Solar Panel Temp
Air 60°
Water 71°
11
2:04 pm
Off
Stop
12:00p
12:00p
12:00p
12:00p
104
2:04 pm
Off
Stop
12:00p
12:00p
12:00p
12:00p
Off
2:04 pm
Off
Stop
12:00p
12:00p
12:00p
12:00p
60
E
Select protectio
and on Setup sc
Status of device
Press <Enter>
to change
Select protectio
and on Setup sc
Status of device
Press <Enter>
to change
Select protection
and on Setup sc
Status of device

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Personalized Automated Control System and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Eos command center

Table of Contents