How To Operate Your Dishwasher - Hotpoint HDA467K Use And Care Manual

Built-in dishwasher
Table of Contents

Advertisement

How to operate your dishwasher

STEP 1.
Load your dishwasher
with dishes, silverware, pots, pans,
bowls, etc. according to
instructions on pages 8 and 9.
STEP 2. Add detergent to the
detergent dispenser. Make sure the
Cycle Indicator Dial is at OFF
position before adding detergent.
See pages 6 and 7.
Use rinse aid agent to help prevent
spotting. See page 6.
STEP 3. Select DRYING HEAT
Option. It must be ON for PLATE
WARMER cycle, OFF for RINSE
HOLD cycle. It can be ON or OFF,
at your option (see below), for any
of the wash cycles.
DRYING
HEAT OFF
DRYING HEAT ON. Turns the
drying heater on for fast drying.
DRYING HEAT OFF. ~rns the
drying heater off to save energy.
Dishes will dry naturally over a
longer period such as overnight.
If you need your dishes sooner,
open the dishwasher door afier the
cycle is complete to reduce the
natural drying time.
Use of this option reduces the
electrical energy used by this
model approximately 10% for
the NORMAL WASH cycle.
STEP 4.
Select the Cycle and start
dishwasher.
If your dishwasher drains into a
food waste disposer, operate the
disposer until it is empty before
starting the dishwasher. (See Cycle
selection hints on next page. )
To obtain the benefits of a comDlete
cycle, be careful that you do n;t
turn the dial any further than
necessary to start the dishwasher.
For NORMAL WASH cycle:
a. Latch the door.
LIGHT WASH
ON W
OFF
DRYING
HEAT ON
b. Slowly turn Cycle Indicator Dial
to ON position to start the cycle.
There is a time delay between
start-up and water fill so you will
not hear any wash action right
away.
Door Latch
(Locked)
a. Be sure door is unlatched.
b. Slowly turn Cycle Indicator Dial
c. Latch door to start the cycle.
a. Be sure door is unlatched.
b. Select DRYING HEAT–OFF
, RINSE ::f~~
HOLO
E
PLATE WARMER
c. Slowly turn Cycle Indicator
d. Latch door to start the cycle.
4
Cycle Indicator Dial
(Turn to Start)
For LIGHT WASH cycle:
to LIGHT WASH position.
For RINSE HOLD cycle:
drying option.
ON
, RINSE ::::.:
OFF
HOLO
PLATE WARMER
s, LE~O.YINGHEAT%
Dial to RINSE HOLD position.
=

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hda467lHda497kHda477k

Table of Contents