Hotpoint HDA467K Use And Care Manual page 12

Questions?
PROBLEM
DISHWASHER
WON'T RUN
UNUSUAL NOISE
DISHES DON'T DRY
UNCLEAN DISHES
MARKS ON DISHES
DETERGENT LEFT
POSSIBLE CAUSE AND REMEDY
A fise in your home may be blown, or the circuit breaker tripWd. Replace fuse or
reset circuit breaker. Remove any other appliances from the circuit.
Utensils may not be sectlre on rack pins. Or something small may have dropped from
the rack. Water is causing utensils to rattle. Make sure everything is securely placed
in dishwasher.
Make sure inlet water temperature is corrwt. (See page 6.)
Unload the bottom rack first. Water from dishes in the top rack maybe spilling into tl
bottom rack.
Check for improper loading. Dishes shouldn't nest together. Avoid overloading.
Check inlet water tem~rature. it should beat least 120°F. (To test, seepage 6.)
To obmin the benefits of a complete qcle, be carefil that you do not turn the dial an
Water pressure may be temporarily low. Turn on a faucet.
than usual? If so, wait until pressure is normal before using your dishwasher.
Plugged air gap. (See page 11.)
Improper rack loading. (See pages 8 and 9.)
Aluminum d~sifi often leave marks when they rub against other things. Remove
marks with a mild abrasive cleanser.
detergent
cup.
The dispenser cover may not be opening or may be blocked by improperly loaded
items. If you used a powder detergent, open the cup and remove any caked-on
12
water coming out slower
Is