Updating The Unit's Firmware Via The Network - Yamaha RX-V777 Owner's Manual

HDMI HDMI
1 1 2 2 3 3 4 4
New firmware that provides additional features or product
5 5 V-AUX V-AUX
improvements will be released as needed. If the unit is connected
AV AV
1 1 2 2 3 3 4 4 to the Internet, you can download the firmware via the network and
AUDIO AUDIO
update it.
5 5 6 6 1 1 2 2
TUNER TUNER USB USB NET NET
MAIN MAIN ZONE 2 ZONE 2 PARTY PARTY HDMI OUT HDMI OUT
SCENE SCENE
BD BD
TV TV NET NET RADIO RADIO
DVD DVD
PROGRAM PROGRAM MUTE MUTE VOLUME VOLUME
TOP MENU TOP MENU POP-UP/MENU POP-UP/MENU
ON ON
OPTION OPTION
SCREEN SCREEN
Cursor keys
ENTER
ENTER
• You can also update the firmware using the USB memory device from the
RETURN RETURN DISPLAY DISPLAY
BAND BAND
A firmware update is available if the following message is displayed
MODE MODE
TUNING TUNING PRESET PRESET
after ON SCREEN is pressed.
SUR. DECODE SUR. DECODE STRAIGHT STRAIGHT
MOVIE MOVIE MUSIC MUSIC
ENHANCER ENHANCER PURE DIRECT PURE DIRECT
INFO INFO SLEEP SLEEP
1 1 2 2 3 3 4 4
5 5 6 6 7 8 8
9 9 0 0 MEMORY MEMORY ENT ENT
1
2

Updating the unit's firmware via the network

Note
• Do not operate the unit or disconnect the power cable or network cable during
firmware update. Firmware update takes about 20 minutes or more
(depending on your Internet connection speed).
• If the unit is connected to the wireless network, network update may not be
possible depending on the condition of the wireless connection. In this case,
update the firmware using the USB memory device (p.118).
• For details on update, visit the Yamaha website.
"ADVANCED SETUP" menu (p.118).
Read the on-screen description.
To start the firmware update, use the cursor keys to
select "START" and press ENTER.
The on-screen display turns off.
3
If "Update Success Please Power Off!" appears on
the front display, press MAIN ZONE z on the front
panel.
The firmware update is complete.
• If you want to update the firmware later, select "CLOSE" in Step 2. "!" (exclamation
mark) appears at the upper right of the "Information" and "System" icons, and a
message will be displayed in the "System" screen (p.115). You can update the
unit's firmware by pressing ENTER in the "System" screen.
Information
icon
Message
System Icon
CONFIGURATIONS ➤ Updating the unit's firmware via the network
119
En