Table of Contents
Advertisement
Section 5 - Troubleshooting
2. The computer does not recognize the GO-USB-N150 Wireless Adapter.
Make sure that the GO-USB-N150 Wireless Adapter is properly seated in the computer's USB port.
If Windows does not detect the hardware upon insertion of the adapter, make sure to completely remove drivers that were
previously loaded.
3. The computer with the GO-USB-N150 installed is unable to connect to the wireless network and/or the Internet.
• Check that the LED indicators for the broadband modem are indicating normal activity. If not, there may be a
problem with the broadband connection.
• Check that the LED indicators on the wireless router are functioning properly. If not, check that the AC power
and Ethernet cables are firmly connected.
• Check that the IP Address, subnet mask, gateway, and DNS settings are correctly entered for the network
• In Infrastructure mode, make sure the same Service Set Identifier (SSID) is specified on the settings for the
wireless clients and access points.
D-Link GO-USB-N150 User Manual
30
Advertisement
Table of Contents
Need help?
Do you have a question about the dlinkgo GO-USB-N150 and is the answer not in the manual?
Questions and answers