D-Link AirPlusXtremeG DWL-G650 Quick Installation Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Adapter
  5. AirPlusXtremeG DWL-G650
  6. Quick installation manual
D-Link AirPlusXtremeG DWL-G650 Quick Installation Manual

D-Link AirPlusXtremeG DWL-G650 Quick Installation Manual

2.4ghz wireless cardbus adapter
Hide thumbs Also See for AirPlusXtremeG DWL-G650:
Table of Contents

Advertisement

Quick Links

Download this manual
This product works with the following operating
Windows XP, Windows
system software:
2000, Windows Me, Windows 98SE

Before You Begin

You must have at least the following:
•
A laptop computer with an available 32-bit Cardbus slot
•
At least a 300 MHz processor and 32MB of memory
•
Cardbus Controller properly installed and working in the laptop computer
•
An 802.11g or 802.11b Access Point (for Infrastructure Mode) or another
802.11g or 802.11b wireless adapter (for Ad-Hoc; Peer-to-Peer networking
mode.)
Check Your Package Contents
These are the items included with your DWL-G650 purchase:
If any of the above items are missing, please contact your reseller.
Insert the D-Link CD-ROM Into Your
Computer
Turn on the computer
Insert
the
D- Link AirPlus XtremeG DWL-
G650 Driver CD in the CD-ROM drive.
The step-by-step instructions that follow are shown in
Windows XP. The steps and screens are similar for the
other Windows operating systems
©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
DWL-G650 AirPlus XtremeG 2.4GHzWireless Cardbus
Adapter
CD-ROM (containing Drivers, Manual and Warranty)
and
specifications subject to change without notice. DWL-G650 09232003
Wireless Cardbus Adapter
Cardbus Adapter into
your computer before
installing the driver
software from the
D-Link CD!
1
DWL-G650
AirPlus XtremeG 2.4GHz
Do
NOT
install
the DWL-G650
Part No. IG-BDWLG650

Advertisement

Table of Contents
loading

Related Manuals for D-Link AirPlusXtremeG DWL-G650

Summary of Contents for D-Link AirPlusXtremeG DWL-G650

  • Page 1: Before You Begin

    Windows XP. The steps and screens are similar for the D-Link CD! other Windows operating systems ©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DWL-G650 09232003 Part No. IG-BDWLG650...
  • Page 2 Continued... The Install Screen will appear. Click Install Driver If the CD Autorun function does not automatically start on your computer , type “D:\Driver\Setup.exe.” If it does start, proceed to the next screen. Type “D:\Driver\Setup.exe.” The letter “D” represents the letter of the CD-ROM drive.
  • Page 3 Click Next Click Finish Shut down your computer Remember to leave the Driver CD in the CD-ROM drive.
  • Page 4 Installing the DWL-G650 Wireless Cardbus Adapter in Your Computer Make sure to turn off the laptop computer. Locate the cardbus slot on your laptop computer. Gently insert the DWL-G650 into the cardbus slot in your laptop computer (as shown.) 32-bit connector This is the connector that fits into the cardbus slot of your laptop.

  • Page 5: Restart Your Computer

    Restart Your Computer When you restart your computer this Found New Hardware Wizard (Windows XP) screen may appear: Select Install the software automatically (Recommended) Click Next For Windows XP: This Hardware Installation alert screen may appear after the desktop computer restarts. Click Continue Anyway to finalize the installation...
  • Page 6 Your Installation is Complete! After you have continued in Windows XP, 2000, Me, or 98SE, the D-Link DWL- G650 Configuration Utility will automatically start and the utility icon will appear in the bottom right hand corner of the desktop screen (systray). If this icon...
  • Page 7 Appendix For Windows XP, if you wish to use the Xtreme G utility, please do the following steps. Click the XP Networking icon to use the Zero Configuration Wireless Settings. Click Advanced Uncheck “Use Windows to configure my wireless net- work settings.

  • Page 8: Using The Configuration Utility

    Appendix (cont.) Using the Configuration Utility Status: Displays the Dis- Frequency MAC Address of the SSID The Service Set Identifier plays the current Access Point that is is the name assigned to the frequency used by associated with the wireless network. The factory the adapter.
  • Page 9 Appendix (cont.) Using the Configuration Utility (cont.) SSID: The Service Set Identifier is the name as- Wireless Mode: signed to the wireless Data Encryption: The factory setting is network. The factory SSID default setting is set to set to Infrastructure. setting is set to default.

  • Page 10: Ip Address Configuration

    IP Address Configuration To connect to a network, make sure the proper network settings are configured for DWL-G650. Microsoft Windows XP: Go to Start > Right-click on My Network Places > select Properties > Double-click on the Network Connection associated with the DWL-G650.

  • Page 11: For Windows 2000 Users

    For Windows 2000 users: Go to Start > Settings > Network and Dial-up Connections > Double-click on Local Area Connection associated with the DWL-G650 > select Properties Click Internet Protocol (TCP/IP) Click Properties Dynamic IP address setup Used when a DHCP server is available on the local network.

  • Page 12: Technical Support

    Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our website, or by phone.

Table of Contents