Appendix C: Specifi Cations - Tapco 6306 Owner's Manual

Appendix C: Specifi cations
Frequency Response
Mic Input to any Output (Trim at 0 dB):
Distortion
THD and SMPTE IMD; 20Hz to 20kHz
Mic Input to Main Output:
Noise
20Hz to 20kHz BW (150Ω source impedance)
Equivalent Input Noise (EIN):
Residual Output Noise:
Channel & Main Mix levels off
Main, Ctrl Room, Phones:
Aux 1 Monitor out
Aux 2 EFX out
Common Mode Rejection Ratio
(CMRR)
Mic In:
Crosstalk
Adjacent Inputs or Input to Output:
Input Gain Control Range
Mic In:
Line In:
Phantom Power
Equalization
Mono Channel EQ:
High
Low
Stereo Channel EQ:
High
Low
Mixer Rated Output
Main, Aux, Control Room:
Maximum Rated Output:
Maximum Input Levels
Mic Input:
Inst Input:
Stereo Line Input, Tape Input, and Aux Return:
16
Maximum Voltage Gain
+0, –1 dB,
20 Hz to 20 kHz
–3 dB,
10 Hz to 80 kHz
< 0.025%
@ +4 dBu output
–128 dBu
–102 dBu
–82 dBu
–92 dBu
60 dB @ 1kHz
Gain @ maximum
–85 dB @ 1kHz
Input Impedance
+3 dB to +50 dB
–22 dB to + 25 dB
Output Impedance
+48 VDC
±15 dB @ 12 kHz
Channel Level Set LED (Sensitivity)
±15 dB @ 80 Hz
±15 dB @ 12 kHz
±15 dB @ 80 Hz
VU Meters
+4 dBu
+18 dBu
+18 dBu,
Gain @ +3 dB
+18 dBu,
Gain @ –22 dB
+18 dBu
Mic Input to:
Main Output:
Tape Output:
Aux Sends:
Control Room Output:
Phones Output:
Inst Input to:
Main Output:
Tape Output:
Aux Sends:
Control Room Output:
Phones Output:
Stereo Line Input to:
Main Output:
Tape Output:
Aux Send:
Control Room Output:
Phones Output:
Tape Input to:
Main Output:
Tape Output:
Control Room Output:
Phones Output:
Aux Return to:
Main Output:
Tape Output:
Aux Send:
Control Room Output:
Phones Output:
Mic Input:
Inst Input:
Stereo Line Input:
Stereo Aux Returns:
CD/Tape In:
Main, Ctrl Room, Aux Sends:
Tape Output:
Phones Output:
Main Left and Right
8 segments:
Clip (+16), +12, +8, +4, 0, –2, –4, –12, –24
0 LED = +4 dBu
74 dB
74 dB
74 dB
84 dB
84 dB
49 dB
49 dB
49 dB
59 dB
59 dB
20 dB
20 dB
20 dB
30 dB
30 dB
10 dB
10 dB
10 dB
10 dB
20 dB
20 dB
20 dB
30 dB
30 dB
2.3 kΩ, balanced
1 MΩ
20 kΩ, balanced
20 kΩ, balanced
24 kΩ, unbalanced
120 Ω
1 kΩ
25 Ω
0 dBu
(normal operating
level)