Table of Contents
Advertisement
Network Camera User's Manual
(2) "Periodically"
periodically for every other defined minute.
parameters
(1) "M
otion parameters"
Higher sensitivity and small threshold will allow easier motion detection.
(2) "P
eriod parameters
periodically for every other defined seconds. Up to 999 seconds are allowed.
Media mode
There are three choices of media types available: "Snapshot","
", "Record(Motion Detection only)" and "System log".
output signal
Snapshot & Record file setting
You can setting the file name, and enable or disable to add the date and time
on file name. Can setting the digital output duration seconds.
Response mode
There are five choices of server types available: Email, FTP, NAS, SD Card, and USB
storage. Select the item to display the detailed configuration options.
(1)"Email"
-- "Email security mode" : If your SMTP server requires a secure connection
(SSL or TLS), check This server requires a secure connection (SSL or TLS).
-- "Sender email" address: Enter the email address of the sender.
-- "Recipient email" address: Enter the email address of the recipient.
-- "Server address"
server.
--"User name"
--"Password"
--"Server port"
manually set another port.
(2)"FTP"
-- "Server address"
-- "Server port"
-- "User name"
-- "Password"
-- "FTP folder name"
the folder name does not exist, the Network Camera will create one on the FTP
server.
(3)"HTTP "
-- "URL"
Enter the URL of the HTTP server.
-- "User account" Enter the user name if necessary.
-- "User password" Enter the password if necessary.
(4)"NAS"
--"NAS server address"
--"NAS shared directory" Enter the NAS shared directory path.
--"Workgroup" Enter the NAS workgroup parameter.
--"User account"
--"User password"
This option allows the Network Camera to trigger
"
This option allows the Network Camera to trigger
Enter the domain name or IP address of the email
Enter the user name of the email account if necessary.
Enter the password of the email account if necessary
The default mail server port is set to 25. You can also
Enter the domain name or IP address of the FTP server.
By default, the FTP server port is set to 21.
Enter the login name of the FTP account
Enter the password of the FTP account.
Enter the folder where the media file will be placed. If
Enter IP address of the NAS server.
Enter the login name of the NAS account
Enter the password of the NAS account.
40/54
Generate digital
Advertisement
Table of Contents
