Honeywell ACM574TPX Specifications

Honeywell Video systems series cameras are the
first choice for any video surveillance
applications that require exceptional levels of
performance and reliability.
Ideal for use with Digital Video Recorders, this
range of high sensitivity systems cameras offer
features such as Digital Signal Processing (DSP),
Back Light Compensation (BLC), Discrete
Cosine Transfer (DCT) feature to reduce signal
noise in low light which maximises the
compression of images when used with digital
equipment and Peak White Inversion (PWI) to
eliminate the effect of point sources of light that
would normally cause the lens iris to close such
as car headlamps.
Honeywell systems cameras also offer the
ultimate flexibility, giving installers the choice of
connecting via coax or unshielded twisted pair
(UTP) wiring with the module.
Available in high resolution colour and
monochrome versions in both low and mains
voltage, the Honeywell Systems cameras provide
the perfect choice for professional installers.
December 2004
ACM574TPX / ACM575X
ACCM484TPX / ACCM485TPX
High Resolution
DSP Colour and Monochrome
Systems Camera Range
Features
•
NVT twisted pair video output terminals (ACM 574
TPX, ACCM484TPX and ACCM485TPX models)
• Peak White Inversion (PWI)
• Discrete Cosine Transfer switch (DCT)
• Selectable, 8 window, BLC
• 1/3" interline transfer CCD
• Internal and line lock synchronisation
• C and CS lens mount
• Tooless back focus adjustment with adjustment
points top and bottom
• Gamma selection 0.45 for increased visibility in
darker areas of a scene and 1.0 for a more linear
response
• Automatic Gain Control (AGC) to improve camera
sensitivity when scene illumination is low
• Electronic Iris (EI) to compensate for varying light
levals when using manual iris lenses internally
• Supports direct drive and auto-iris lenses
• Integral chroma surpression under low light
conditions. (ACCM484TPX only)
Datasheet