Care And Cleaning - Hotpoint BE82 Instructions For Installation And Use Manual

BEFORE SWITCHING OFF THE ELECTRICITY TO CLEAN, ALWAYS ENSURE THE HEATING ZONES ARE
COOL TO TOUCH AND THAT THE RESIDUAL HEAT INDICATORS ('
NEVER USE BIOLOGICAL WASHING POWDER, HARSH ABRASIVE, SCOURING PADS, AEROSOL
CLEANERS OR OVEN CHEMICAL CLEANERS OF ANY KIND.
Cleaning Materials To Avoid
1. Household abrasive powders.
2. Oven chemical cleaners, aerosols and oven pads Caustic cleaners such as these will
etch the surface and attack the metal frame.
3. Bath and sink cleaners may mark the surface
The Ceramic Hob
To reduce the amount of cleaning always ensure that the hob and cooking utensils are
clean and dry before use. Regular use of cleaner conditioner is recommended for proper
care and protection of the hob surface. Apply conditioner before using the hob for the
first time. It contains a mild cleaning agent, so that subsequent applications may clean
off soil and apply a protective film at the same time. For stubborn stains or heavy soiling
use any of the following materials, and finish off with conditioner.
1. Cif, non-scratch scouring cream.
2. Liquid Kitchen Cleanser.
3. Special Powder Cleanser.
Powder Cleanser – Mineral deposits that are present in hard water, and some foods,
may cause 'discolourations' that appear in the form of grey or brown stains. The stains
sometimes appear to be in or under the glass surface. If there are some persistent stains
after using any of the other recommended cleaning materials, powder cleanser may be
applied, following the manufacturers instructions. Do not use abrasive cleaners or the
powder cleanser on the painted metal framework.
Cleaner Conditioner – Regular use of the conditioner will make the surface easier to
clean thus ensuring that years of heavy abrasive cleaning do not progressively dull the
surface.
If the hob is scratched through accident or misuse, soil that collects will appear as fine
brown lines; these are not fully removable but can be made less obvious by the daily use
of cleaner conditioner. Cooking performance is in no way affected by scratches on the
surface.
Pans should be lifted rather than dragged across the hob surface. This will avoid metal
rubbing off the pan onto the glass. Such marks are easily removed by the powder
cleanser, provided they are not subsequently baked on for long periods at high
temperatures.
Surround Trim _ Wipe over with a cloth wrung out in warm soapy water only.
DO NOT USE ABRASIVES.
Fig. 1
Grease or oil can catch fire when overheated. For this reason, it is important not to become
distracted from the cooking process when preparing food (e.g. chips) using either of these.
WARNING: Do Not keep inflammable materials (e.g. sprays) or utensils which might catch
fire beneath the kitchen hob.
18

Care and Cleaning

Take care that no hard or pointed objects (e.g. cans) fall onto your
ceramic hob. They may damage it.
If, for some reason, the glass-ceramic should break or crack, turn the
appliance off immediately and disconnect it from the power supply.
Sugar or foodstuffs containing sugar which have spilt onto the
glass-ceramic should be removed whilst warm using a glass-ceramic
scraper, Fig.1. Failing to do so may damage the appliance.
PLEASE NOTE:Take care when using the glass scraper. To retract
the blade cover use the thumb location.
H
') ARE NOT ILLUMINATED.