Hotpoint BE72 Instructions For Installation And Use Manual page 11

Choosing the power
setting
Using Your Hob
Touch the symbol
zone, and the display will increase ....
when the desired level is reached.
NOTE: By pressing the
to level and then back down to level if you so wish.
To turn down the heat, press the
To turn off the cooking zones press the lower and top
parts of the key simultaneously, the power will reduce to
zero and the temperature indicator will turn off OR press
the key and the cooking zone power will decrease
gradually, as will the temperature indicator, until they
both turn off.
While the cooking zones are still hot (temperatures
exceeding 60˚C), the residual heat indicator, adjacent to
the cooking zone, will be lit. However, care should
continue to be taken as the hob may still be hot to touch,
even when the residual heat indicator is extinguished.
WARNING: If a power cut occurs at any time, the hob
will return to its previous state when power is
restored. If all cooking zones were on maximum when
power failed, they will be set at maximum when the
power returns to the hob.
To prevent this, should a power cut occur, switch off
the hob at the mains wall switch.
corresponding to the chosen control
key briefly, you can go directly
key.
levels. Stop
11