Connect; Place The Unit; Connect Speakers; Connect Video Cables - Philips MCD1165 User Manual

3 Connect

Place the unit

1
Place the unit near to the TV.
2
Place the left and right speakers at equal
distance from the TV and at an angle
of approximately 45 degrees from the
listening position.
Note
•
To avoid magnetic interference or unwanted noise,
never place this apparatus and speakers too close to
any radiation devices.
•
Place this unit on top of a table or mount it on the wall.
•
Never place this unit in an enclosed cabinet.
•
Install this unit near the AC outlet where the AC power
plug can be easily reached.

Connect speakers

Note
•
For optimal sound, use the supplied speakers only.
•
Connect only speakers with impedance that is the
same or higher than the supplied speakers. Refer to the
Specifications section of this manual.
EN
8
[Fig. 4]

Connect video cables

You can select the best video connection that
your TV supports.
Option 1: Connect through a composite
•
video (CVBS) cable (for a standard TV).
Option 2: Connect through component
•
video cables (for a standard TV or
Progressive Scan TV).
Option 1: Connect through a
composite video cable
Connect the composite video cable (supplied)
to: [Fig. 5]
• the VIDEO socket on the back of the
unit.
• the video input socket on the TV.
SPEAKER OUT
TV