Table of Contents
Advertisement
Network Camera User's Manual
C2.mylevel1.com (Free DDNS service)
When you want to connect the network camera over Internet, you can use the
1.
service "
". The "ip-discovery.com" is a free DDNS server for
C2.mylevel1.com
this camera. Make sure that the router must start UPnP and DHCP server
functions. You can get the domain name which you wish very easily after
registration. In Network page—DDNS settings of this camera, you just input the
host name you want and your e-mail address, and click "Register", then you can
have the hostname for this camera not longer than 20 seconds if the DDNS
registration result is OK. Then you can connect to this ip camera by
*http://XXX.c2.mylevel1.com:@@@@
*XXX: the host name you type
*@@@@: The HTTP port (get it automatically by ip-discovery server)
User password:
Default the password is last six number of the MAC. To change
"root" password at "Security configuration" can change the user password, This
"User password" is entered in the c2.mylevel1.com Password.
Note: You must set the ports between your router and camera manually if the registration
is failed.
16/56
Advertisement
Table of Contents
