How To Use Your Dryer - Hotpoint TDL52 User Handbook Manual

How to use your dryer

1. Plug in, switch
on electricity.
3. Open the door.
Check that the fluff
filter is clean (see
section "How to
remove and clean
the fluff filter").
5. Select the
relevant heat setting
(see section "The
Controls").
7. If required set
time delay period.
Rotate the timer
knob clockwise to
the number of delay
hours required.
TIME DELAY MUST
BE SET BEFORE
DRYING TIME.
TDL54 and TVM55
only.
10. Switch off
electricity and
remove plug from
socket.
Lock the door to
prevent access
(Where lock is
fitted).
WARNING: CHILDREN HAVE BEEN KNOWN TO CLIMB INTO TUMBLE DRYERS AND
INJURE THEMSELVES. ALWAYS ENSURE THAT THE MACHINE IS SWITCHED OFF AT
WARNING:
WHEN SWITCHING
ELECTRICITY ON
OR OFF, PLEASE
ENSURE THAT
YOUR HANDS ARE
DRY.
Button OUT
LOW HEAT
Button IN
HIGH HEAT
8. Select the
required
programme/drying
time (See section
"The Controls").
The dryer will start,
(providing a delay
time has not been
set).
WARNING:
WHEN SWITCHING
ELECTRICITY ON
OR OFF, PLEASE
ENSURE THAT
YOUR HANDS ARE
DRY.
THE MAINS WHEN THE DRYER IS NOT BEING USED.
2. Sort your laundry
(see section "Sorting
Your Laundry")
4. Load the dryer,
placing the clothes
carefully in the drum
pushing them well
towards the back
and away from the
door seal. Close the
door.
6. Select Alarm
(Buzzer) option, if
required (see section
"The Controls").
TDL54 and TVM55
only.
9. When finished,
unlock and open
the door and take
out the laundry.
Clean and replace
the fluff filter.
Door Release
To open the door, grip the handle and pull
towards you. If the door is opened while the
Dryer is in use, the drying programme cuts out
automatically and the machine stops. When
the door is closed the Dryer will restart but you
will not need to reset the Timer Control. You
can however reset the Timer Control at any
stage, should you wish.
Button OUT
ALARM OFF
Button IN
ALARM ON
9