HP TouchSmart 9100 User Manual page 24

The Ethernet port on the HP TouchSmart 9100 is located on the back of the computer, behind the
connector cover.
6 Add other computers or devices to your wired network:
a Disconnect power from the broadband modem and the router, and then shut down your
HP TouchSmart 9100 and the computers you want to add to your network.
b For each wired computer, connect one end of an Ethernet cable to the LAN connector on the
computer, and then connect the other end of the cable to any available Ethernet connector on
the router.
c Reconnect power to the modem, and wait until the modem has completed its startup cycle.
Reconnect power to the router. Then, turn on the wired computers and your HP TouchSmart 9100.
d Test the network connection for each wired computer by opening your Web browser and
accessing any Web site.
18
User Guide (Features may vary by model)