Replacing the Optical Drive
Procedure
Align the screw holes on the optical-drive bracket with the screw holes on the
1
optical drive.
Replace the screws that secure the optical-drive bracket to the
2
optical drive.
Align the tabs on the optical-drive bezel with the slots on the
3
optical-drive assembly and snap the optical-drive bezel into place.
Slide the optical-drive assembly into the optical-drive bay until it is
4
fully seated.
Replace the screw that secures the optical-drive assembly to the
5
computer base.
Postrequisites
Replace the base cover. See "Replacing the Base Cover" on page 20.
1
Replace the battery. See "Replacing the Battery" on page 13.
2
Follow the instructions in "After Working Inside Your Computer" on page 9.
3
Optical Drive
|
29