Replacing the USB Board
Procedure
Align the screw hole on the USB board with the screw hole on the
1
computer base.
Replace the screw that secures the USB board to the computer base.
2
Connect the USB-board cable to the USB-board connector.
3
Postrequisites
Replace the palm rest. See "Replacing the Palm Rest" on page 41.
1
Follow the instructions from step 4 to step 5 in "Replacing the Optical Drive" on
2
page 29.
Replace the base cover. See "Replacing the Base Cover" on page 20.
3
Replace the keyboard. See "Replacing the Keyboard" on page 18.
4
Replace the battery. See "Replacing the Battery" on page 13.
5
Follow the instructions in "After Working Inside Your Computer" on page 9.
6
USB Board
|
59