Table of Contents
Advertisement
Available languages
Available languages
Adjusting the Scanning Mode
Press the "Effect" button to select between color or mono. Selection will be shown in
the display.
Scanning
1. Press the Turn ON button.
2. Scanner will be set to standby mode. Select the color and resolution.
3. Adjust the width selector to match your document.
4. Place the document with the information facing down.
5. Once the scanner detects the document, scanning process will start and the Turn
ON button light will turn green.
6.Scanner will pull the document and store the image automatically. When the
counter increases the number by one, the scanner will be ready to scan a new
document.
Advertisement
Table of Contents
