Date And Time Adjustment; Selecting The Resolution - Perfect Choice PC-171669 Manual

Note: Do not force the card into the slot; otherwise you can damage both, the slot
and the card. Align the card as shown in the drawing and try again in case you have
problems inserting it.

Date and Time Adjustment

1. Press the "Time Set" button.
2. Display will show 1 XX, then press the Effect and DPI button to select the desired
numbers.
3. Press "Enter" to confirm selection.
4. Display will show the following settings, in sequence: 1 XX year, 2 XX month,
3 XX day, 4 XX hour, 5 XX minutes.
5. After entering the desired information, press the "Time Set" button again to exit the
date and time mode adjusting.
Formatting the MicroSD memory
1. Insert a new microSD card in the slot and turn on the scanner.
2. Press the "Format" button. "F" will be shown in the display.
3. Press the "Enter" button to start formatting the memory.
4. Card indicator will blink until formatting is completed.

Selecting the Resolution

Press the "DPI" button to select between high/low resolution. Selected resolution will
be shown in the screen.