Advertisement
Quick Links
My Zing®/Easy Vac/Powerforce® Bagged Canister Vacuum has no suction
| Support
Model #'s 1668, 2154, 22Q3, 4122 Zing/PowerForce Bagged
•
Disconnect hose from canister
•
Turn machine on
•
Place hand over hole on canister to feel for suction
o
If no suction, adjust the variable suction control on the machine
▪
•
Verify bag is not full and is installed correctly
•
Confirm dust bag compartment door is completely closed
•
Inspect filters
o
Lift bag to access pre-motor filter
•
Turn the circular knob to adjust suction from minimum to maximum
•
•
o
Advertisement
Related Manuals for Bissell Zing 1668
Summary of Contents for Bissell Zing 1668
- Page 1 My Zing®/Easy Vac/Powerforce® Bagged Canister Vacuum has no suction | Support Model #'s 1668, 2154, 22Q3, 4122 Zing/PowerForce Bagged • Disconnect hose from canister • Turn machine on • Place hand over hole on canister to feel for suction • •...
- Page 2 Pull filter up and out to remove Lift post-motor filter cover up on back of machine to access post-motor filter Clean both filters in warm water with mild detergent Allow to completely air dry (24-48 hours) before reinstalling ▪ Ensure black sponge layer of pre-motor filter faces out into the bag compartment ▪...
- Page 3 ▪ This feature is for instances in which low suction is required • Examine hose for clogs Detach hose from machine Carefully insert a broom handle through the hose to clear any debris Inspect hose for damage or cracks ▪ If damaged, a new hose will need to be ordered •...
Need help?
Do you have a question about the Zing 1668 and is the answer not in the manual?
Questions and answers