Download Print this page

Troubleshooting - Pinnacle Speakers Subwoofer Owner's Manual

Advertisement

TROUBLESHOOTING:

No Sound only from Subwoofer - Check the subwoofer's volume setting and all connections. If your
receiver has a subwoofer on/off or variable subwoofer output level control, ensure that the subwoofer
option it is turned on and that the output level is at maximum. Ensure that the center channel mode on
the receiver is in the NORMAL or SMALL position. Make sure that the subwoofer's RCA cable is
connected to the receiver's subwoofer output and not a subwoofer input jack. In the event that the
problem persists, refer to the TO OBTAIN SERVICE section of your warranty at the end of this manual.
No Sound only from Left and Right Front Speakers - Check all connections. Ensure that your receiver's
speaker channel A or B is switched on.
Too Little Bass - Check: subwoofer volume & receiver subwoofer output control settings; receiver
bass/loudness controls; program material; ensure that the center channel mode on the receiver is in the
NORMAL or SMALL position. If your receiver has a variable subwoofer output level control, ensure that
the output level is at maximum. Try moving the subwoofer further into a corner or towards the wall.
Too Much Bass - Check: subwoofer volume & receiver subwoofer output control settings; receiver
bass/loudness controls; program material; move subwoofer further out of corner or away from wall.
Hum: Check for faulty phono connecting cable. Try to separate phono cables from power cords (they
can induce hum into the system). If that doesn't work we recommend you turn off your subwoofer when
it is not in use. This is most easily accomplished by either connecting its powercord to a switched
power outlet on the back of your receiver (if it has them) or by using a Remote Controlled Switched
Outlet.
5

Advertisement

loading

This manual is also suitable for:

Powered subwoofer