Bobbin Winding; Inserting The Bobbin - Pfaff Smarter 140s Owner's Manual

A
B

Bobbin Winding

spool cap tightly against the spool.
front to the back. Pull the thread clockwise around
the inside to the outside.
4. Place the bobbin on the bobbin spindle.
5. Push the bobbin spindle to the right to activate the bobbin winding. Press the foot
When the bobbin is full, the bobbin winding will slow down and stop automatically.
Push the bobbin spindle to the left. Remove the bobbin and cut the thread.

Inserting the Bobbin

Make sure that the needle is fully raised
and the machine is turned off before in-
serting or removing the bobbin.
2. Insert the bobbin in the bobbin
case with the thread running in a
counterclockwise direction.
4. Pull the thread clockwise until it
5. Replace the bobbin cover.
1.
B
3.
C
5.
C
2.
A
4.
D
17