Hotpoint WE26 User Manual

Hotpoint model we26 wine cellar user guide

Advertisement

Advertisement

Table of Contents
loading

Summary of Contents for Hotpoint WE26

  • Page 1: Table Of Contents

    Product Description, 3 Interior Parts Using the Wine Cellar 4 Bottle ageing compartment Manual temperature control Table of ideal wine temperatures Stocking the wine bottles, 6 How to stock the bottles WE26 Maintenance and troubleshooting, 8 Care and Maintenance Troubleshooting...
  • Page 2: Installation

    ! The power cord should be regularly checked and, if necessary, replaced only by a qualified technician. ! The manufacturer cannot be held responsible if these procedures are not followed. TECHNICAL INFORMATION Model WE26 Temperature 1 Zone Width cm 59 Measurements Height cm 68...
  • Page 3: Product Description

    Product Description Interior Parts BOTTLE AGEING COMPARTMENT Control Panel ON LIGHT DISPLAY CURRENT TEMPERATURE LIGHT CONTROL DOOR PANEL SHELVES DATA PLATE REDUCE INCREASE TEMPERATURE TEMPERATURE POWER COOLING LIGHT CONNECTION INDICATOR LIGHT LIGHT ON/OFF BUTTON...
  • Page 4: Using The Wine Cellar

    Using the wine cellar Bottle ageing compartment The ageing compartment's main function is that of guaranteeing that your wines are preserved in optimal conditions. The wine cellar's temperature was factory pre-set at 15° C, a temperature that is considered optimal for most wines.
  • Page 5: Table Of Ideal Wine Temperatures

    Table of ideal wine temperatures This table indicates the approximate temperatures at which wine should be served. Should one of your wines need to be served at a temperature that is greater than the temperature inside your wine cellar, we suggest that you leave it wine out for the time that is necessary before you serve it.
  • Page 6: Stocking The Wine Bottles

    Stocking the wine bottles Standard 36-bottle stock The 36-bottle stock (for standard, mixed, and renana bottles) is recommended for wines that need to be visible and easily removed. Position each bottle into the slots on the 5 wooden shelves. 6 bottles can be placed on the bottom of the wine cellar.
  • Page 7 Removing the wooden shelves Follow the instructions below to remove the wooden shelves: 1. Hold the front part of the shelf with one hand. 2. With the other hand push the back of the shelf upward. 3. Slowly remove the shelf by pulling it toward you. Pull out the shelf by 1/3 of the way if you need to remove or replace bottles.
  • Page 8: Maintenance And Troubleshooting

    Maintenance and troubleshooting Care and maintenance Disconnecting the wine cellar During cleaning and maintenance, it is imperative that you unplug the wine cellar Troubleshooting If you notice that your wine cellar is not working properly, check with the following list before you call your Service Centre.

Table of Contents