Basics Of Networking - Elk IP232 Installation And Configuration Manual

Basics of Networking

The installer must have a basic understanding of Ethernet setup to install and configure the ELK-IP232. If you do not
have this basic knowledge, please seek the assistance of a network professional.
Connection to outside the local network
may require assistance from others,
including the Internet service provider
and the network administrator.
Refer to the Notes on
Router Setup located
on page 8.
Technical support from Elk
Products, Inc. is limited to the
setup and connection of the
ELK-IP232 inside the local
network.
Page 4
The
Internet
ISP
Location
High Speed
Modem
Router with Built-In
Dynamic DNS Support
PC
ELK-IP232 Installation and Configuration Manual
Cable
DSL
Satellite
Cable Modem
DSL Modem
Satellite Modem
If using a DSL modem, the modem may
need to be bridged to allow the IP
address to be passed to the router.
Contact the manufacturer of the modem
for assistance.
ELK-IP232
WAN
Wide Area Network
LAN
Local Area Network