Basics Of Networking - Elk -M1XEP Installation Manual

The installer must have a basic understanding of Ethernet setup to install and configure the M1XEP. If you do not
have this basic knowledge, please seek the assistance of a network professional.
Connection to outside the local
network may require assistance from
others, including the Internet service
provider and the network administrator.
Refer to the Notes on
Router Setup located
on page 14.
Technical support from Elk
Products, Inc. is limited to the
setup and connection of the
M1XEP inside the local network.
Page 4

Basics of Networking

The
Internet
ISP
Location
High Speed
Modem
Router with Built-In
Dynamic DNS Support
PC
Cable
DSL
Satellite
Cable Modem
DSL Modem
Satellite Modem
If using a DSL modem, the modem may need to
be bridged to allow the IP address to be passed
to the router. Contact the manufacturer of the
modem for assistance.
M1XEP
ELK-M1XEP Installation Manual
WAN
Wide Area Network
LAN
Local Area Network