Control Box - LG LP096CD3A Manual

Packaged terminal air conditioner exploded view

Table of Contents

2.1.2 CONTROL BOX

1. Remove the front grille. (Refer to section 2.1.1)

2. Remove the two screws which fasten the control

box. (See Figure 2)

3. Pull the control box from the Air guide.

4. Remove the control box cover. (See Figure 3)

5. Disconnect wire housings on the control box.

6. Pull the control box assembly out from the unit.

(See Figure 4)

7. Re-install the components by referring to the

removal procedure.

Only for training and service purposes

Figure 2

Figure 3

Figure 4

- 10 -

LGE Internal Use Only

Table of Contents