Table of Contents
Advertisement
49-2559.fm Page 8 Wednesday, August 18, 1999 3:29 PM
3. Set the switch on the bottom of the
console to
TONE
(rotary) dialing, based on the
PULSE
type of service you have.
Important: If the friend or neighbor
whom you choose to accept calls
from your system does not have
touch-tone service, they need to use
a phone that has a tone-pulse
switch. They must send tones to
respond to the dialer's message.
4. Fully extend the antenna and raise it
to a vertical position.
INITIALIZING THE CALL
PENDANT
After you connect the console, you must
initialize the call pendant so the console
recognizes the pendant's commands.
8
1. Set
(touch-tone) or
2. Press
3. Set
If you do not hear a tone, remove the
battery from the pendant (see "Testing
and Replacing the Call Pendant's Bat-
tery" on Page 9). Put the battery back
into the pendant, press
CALL
tery indicator flashes twice. Then initial-
ize the call pendant.
You can use up to eight call pendants
with the console for additional security
or for family members. Repeat this pro-
cedure for each additional pendant.
all the way to
Install/Run
EMERGENCY CALL
pendant. The call pendant's battery
indicator lights and the console
sounds a tone.
to
.
Install/Run
Run
, and check that the pendant's bat-
.
Install
on the call
EMERGENCY
Hide quick links:
Advertisement
Table of Contents
