Radio Mode - Skoda Car Radio Swing User Manual

BT-AUDIO*
Enables a wireless transfer of MP3 data from the telephone preinstallation.

Radio mode

Waveband switch-over
– Press the button RADIO for a long period of time.
Your radio is equipped with FM and AM wavebands. They are divided in 6 memory
levels, i.e. 3 levels for the FM waveband and 3 levels for the AM waveband. There are
each 6 memory spaces available on these levels.
Activation of the FM waveband
The FM waveband is activated when pressing the station key
the button RADIO , you can select between the memory levels FM1, FM2 and FM3.
Activation of the AM waveband
The AM waveband is activated when pressing the station key
pressing the button , you can select between the memory levels AM1, AM2 and
RADIO
AM3.
The process of searching for and storing the radio stations
Manual search
– Search the frequency of the desired radio station by turning the menu control
A
button .
2
Store station
– After selecting the radio station, hold the station key
stored until it briefly switches to mute and a brief signal sounds.
Ofrecido por www.electromanuales.com
A
FM. By briefly pressing
12
A
AM. By briefly
12
A
, on which it should be
12
Automatic station finding with storing the radio stations
– Press the button . An automatic station finding is started during which the 6
AS
stations with the strongest signal in the memory level FMAS and/or AMAS are
stored.
When storing the radio stations on the station keys
desired radio station by pressing a station key
Note
The stored radio stations of the current waveband are updated and stored once again
in the memory level FMAS and/or AMAS by repetitively pressing the button
Function SCAN
The stations of a waveband can be played briefly one after the other (for ten seconds).
A
– Press the menu control button
2
stations of the current waveband.
– In order to call up the original radio station, press the station key
– End the automatic finding by pressing the button
remains selected.
– If you wish to select other radio stations, press the button
RDS functions
Certain radio stations transmit additional text information - designated as radio text.
– The information of the radio text is displayed by pressing the button
Note

The text information must not be available to all radio stations.

Depending upon the quality of the received signal, the radio needs a specific time,
in order to correctly read all the illustrated characters.
General information
A
is finished, you can call up the
12
A
.
12
, the radio searches automatically all available
A
CANCEL.
12
A
OK. The current radio station
12
A
SKIP.
12
INFO
5
.
AS
.