Download Print this page
Audio Technica ES933PMC Specifications
Audio Technica ES933PMC Specifications

Audio Technica ES933PMC Specifications

Cardioid condenser hanging microphones

Advertisement

Quick Links

ES933PMC & ES933PMWC
Cardioid Condenser Hanging Microphones
Features
• Wall/ceiling plate power module permits permanent installation
in standard, single-gang electrical box
• Uniform cardioid polar pattern with 120º acceptance angle
• Low-profile design with low-reflectance finish for minimum
visibility
• Superior off-axis rejection for maximum gain before feedback
• UniGuard
RFI-shielding technology offers outstanding rejection
®
of radio frequency interference (RFI)
• UniSteep
®
filter provides a steep low-frequency attenuation to
minimize pickup of undesired ambient noise
• Available interchangeable elements permit angle of acceptance
from 90º to 360º
• Steel hanger positions microphone over choirs, instrumental
groups and theater stages
• Available in two colors: black (ES933PMC) and white (ES933PMWC)
Description
The ES933PMC is a wide-range miniature condenser microphone with a cardioid
polar pattern. It is designed for quality sound reinforcement, professional
recording, television and other demanding sound pickup applications. The
combination of small size and excellent response makes the microphone ideal for
suspension over choirs, instrumental groups or theater stages.
The microphone requires 11V to 52V phantom power for operation.
The microphone is equipped with UniGuard
offers outstanding rejection of radio frequency interference (RFI).
The microphone's cardioid polar pattern provides a 120° angle of acceptance.
Additional interchangeable elements with omnidirectional (360°), hypercardioid
(100°) and MicroLine
(90°) pickup patterns are available.
®
The microphone includes a 15.2 m (50') permanently attached miniature
cable. Its free end connects to the provided AT8534 wall/ceiling plate power
module via a special TA3F-type connector designed to optimize RFI immunity.
The power module features a white-finished standard electrical cover plate for
easy, secure installation. Output connections on the power module are screw
terminals.
Switches in the power module permit a +10 dB gain setting for extra sensitive
pickup as well as a choice of flat response or low-frequency roll-off (via integral
80 Hz high-pass UniSteep
filter) to help control undesired ambient noise.
®
The microphone comes equipped with a wall/ceiling plate power module, a
vinyl-coated steel hanger for positioning over a choir/orchestra/stage, and a
two-stage foam windscreen. The microphone is enclosed in a rugged housing
with a low-reflectance black finish. It is also available with white housing, cable,
hanger and windscreen as the ES933PMWC.
RFI-shielding technology, which
®
Installation and Operation
The ES933PMC requires 11V to 52V phantom power for operation.
A uniform 120° angle of acceptance provides well-balanced audio pickup. The
microphone should be located forward of the front-most source, above the
rear-most source, and "aimed" between them (Fig.1). Increasing the height of
the mic above the sources will tend to equalize sound levels between them,
but may also increase background/reverberant sound pickup. When possible,
the distance from the mic to the rear-most source should be no more than
twice the distance to the front source, to maintain front-to-rear balance (Fig. 1).
Width of pickup is approximately three times the distance to the closest
performer. If additional mics are needed for wide sources, they should be
positioned apart laterally at least three times the distance to the front source,
to avoid phase cancellation (Fig. 2). To orient the microphone in the proper
direction, twist the housing slightly in its wire holder. (Clockwise rotation moves
the microphone to the right; counterclockwise rotation moves it to the left.)
The provided two-stage foam windscreen simply snaps over the head of the
microphone, effectively reducing noise from wind or ventilation air currents.
An integral 80 Hz high-pass UniSteep
flat frequency response to a low-end roll-off. The roll-off position reduces the
pickup of low-frequency ambient noise (such as traffic, air-handling systems,
etc.), room reverberation and mechanically coupled vibrations. To engage the
UniSteep
®
filter, slide the switch toward the "bent" line. A 10 dB gain switch
is provided for situations that demand extra sensitive pickup. The +10 position
increases the microphone's overall output by 10 dB. To engage the 10 dB gain,
slide the switch toward the +10 position.
The AT8534 wall/ceiling plate power module is designed to be mounted
in a standard metal U.S. single-gang electrical box. For safety and best
performance, use the electrical box only for the AT8534; do not include any AC
power conductors. (Also route the mic cable as far away from AC power cables
as possible.)
Screw-terminal output connections of the AT8534 are the same as those
of an XLR-type plug: shield to Terminal 1, balanced signal and phantom
power to Terminals 2 and 3. Output is phased so that positive acoustic
pressure produces positive voltage at Terminal 2, in accordance with industry
convention. Do not connect the output cable shield to the box. Double-
check to make certain that all input and output leads have no bare wires or
loose strands that could touch each other, the circuit board or the electrical box.
Then attach the power module plate to the electrical box.
120°
ANGLE OF
ACCEPTANCE
Figure 1
AUDIO -
3
RED/ RED
v+
2
AUDIO +
YEL / YEL
SIG
SHIELD
GND
1
SHIELD
INPUT
OUTPUT
Terminal screws
Figure 3
engineered sound
microphones
®
filter provides easy switching from a
®
120°
MIC A
MIC B
3 TIMES
DISTANCE "X"
Figure 2
1"
Yellow-Yellow
/
"
1
Red-Red
2
1
and yellows
Shield strands,
fully twisted
Figure 4
120°
/
" strip reds
8

Advertisement

loading
Need help?

Need help?

Do you have a question about the ES933PMC and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Audio Technica ES933PMC

  • Page 1 Description power to Terminals 2 and 3. Output is phased so that positive acoustic The ES933PMC is a wide-range miniature condenser microphone with a cardioid pressure produces positive voltage at Terminal 2, in accordance with industry polar pattern. It is designed for quality sound reinforcement, professional convention.
  • Page 2: Specifications

    RFI Low frequency roll-off 80 Hz, 18 dB/octave immunity. Audio-Technica offers a crimp tool (ATCT) and RFI shields that enable Open circuit sensitivity –40 dB (10.0 mV) re 1V at 1 Pa...

This manual is also suitable for:

Es933pmwc