Table of Contents
Advertisement
entry modes
j or g
Your Primary text entry mode can
be set to any iTAP™ j or tap g
mode.
p or m
Your Secondary text entry mode can
be set to any iTAP p or tap m
mode, or set to None if you don't
want a secondary entry mode.
Numeric mode enters numbers only.
W
Symbol mode enters symbols only.
[
To set your primary and secondary text entry
modes, press Options > Text Setup in a text entry
view and select Primary Text or Secondary Text.
iTAP™ and TAP mode tips
• Press 0 in a text entry view to
change text case to all capital letters
46
basics
(T), no capitals (U), or next letter
capital (V).
• To enter numbers quickly, press and
hold a number key to temporarily
switch to numeric mode. Press the
number keys to enter the numbers you
want. Enter a space to change back to
iTAP or Tap mode.
• Press S to move the flashing cursor
to enter or edit message text.
• Press
to delete the character to the
left of the cursor. Hold
word.
• To cancel your message, press O.
iTAP™ mode
Press # in a text entry view to switch to
iTAP mode. If you don't see j or p, press
to delete the
Advertisement
Table of Contents
