Pfaff 1196 Instruction Book page 12

(I)
and to wind the bobbin
Raise both spool pins and place a spool of
thread on one of them.
Pull the thread through the thread retainer as
indicated by an arrow. Place the bobbin on
the bobbin winder spindle so that pm A en
ters slot B (see illustation at left).
Wind the thread clockwise around the bobbin
a few times.
Push lever E against the bobbin, hold the
balance wheel
and turn the stop motion
knob toward you. The sewing mechanism is
now disengaged. Start the bobbin winder by
pressing down on the foot control.
The bobbin winder stops automatically when
the bobbin is full.
To re-engage the sewing mechanism after
bobbin winding, turn the stop motion knob in
the balance wheel (8) away from you. The
sewing mechanism s re-engaged automati
cally on starting the machine.