LG 42PQ30 Training Manual page 24

Left and Right X Drive Removal
Left and Right X Drive Removal
After removing the back cover, Main PWB is lifted out of the way, 6 screws removed from heat sink covering
heat sink and TCPs removed, the X-Drive PWBs can be removed.
Showing the tape on the connectors P232 or P331
Peel the tape off the connectors
Gently pry the locking mechanism upward and remove the ribbon cable from the connector.
Removing TCPs.
Gently lift the locking mechanism upward on all
TCP connectors P201~206 or P301~306
Cushion (Chocolate)
TCP
Flexible ribbon cable
24
Carefully lift the TCP ribbon up and off.
Preliminary Information 42PQ30