Ft Control PWB and Power LED (
Ft Control PWB and Power LED (
The Control Switch PWB and Power Switch PWB are located (as viewed from the rear) in the lower left hand
section.
REMOVAL: Remove the 2 screws and unplug the connector P101.
Then remove the 2 screws from the Front IR and Power LED PWB. Remove J1connector.
NEW:
Master Power Switch
Set will not function
With this Mechanical"
switch down in the
open position.
IR
) PWB Removal
IR
) PWB Removal
FRONT KEY PWB
Screw
Screws
P101
FRONT KEY PWB folded back
112
Screw
J2
FRONT IR and
POWER LED PWB
J1
Preliminary Information 42PQ30