DRYER
GAS VALVE OPERATION
The gas valve is a two-stage valve. When the ignition sequence begins, the
igniter is turned on and valve one opens. When the igniter reaches 370° F
(188° C), the igniter is turned off and valve two is opened. If the flame detector
does not detect ignition, valve two is closed and the process is restarted. If
ignition occurs as planned, the drying cycle will operate.
GAS IGNITION SEQUENCE
GAS VALVE CONSTRUCTION
IGNITION FLOW CHART
DLE8377xM/DLG8388xM
DLE7177WM/DLE7188WM
Page 42 of 60
TRAINING MANUAL