Retrieve Your Voicemail Messages - Kyocera Verve User Manual

●
By sounding the assigned ringtone type.
●
By displaying
To call your voicemail from the notification screen:
1. Press .
2. Enter your voicemail password if prompted.
3. Follow the voice prompts to listen to and manage your voicemail messages.
To set the frequency of new message alerts:
1. Press > Settings > Others > Alerts > Repeated Tone > Voicemail.
2. Select Single Tone (once only) or Repeated Tone (once every minute).
Note: When you are roaming off the network, you may not receive notification of new voicemail
messages. It is recommended that you periodically check your voicemail by dialing 1 + area
code + your wireless phone number. When your voicemail answers, press
password. Roaming rates apply when you access voicemail while roaming off the network.
Note: Your phone accepts messages even when it is turned off. However, your phone notifies
you of new messages only when it is turned on and you are in a network service area.

Retrieve Your Voicemail Messages

You can review your messages directly from your wireless phone or from any other touch-tone
phone.
Use Your Phone to Access Your Messages
1. Press and hold
– or –
From standby mode, press MESSAGING (left softkey) > Voicemail.
2. If prompted, enter your voicemail password.
3. Follow the voice prompts to listen to and manage your voicemail messages.
Note: Depending on your plan, you may be charged for airtime minutes when you access
voicemail from your wireless phone.
Use Another Phone to Access Messages
1. Dial your wireless phone number.
Phone Calls
at the top of the screen.
in standby mode.
and enter your
26