User Connections; Dimensional Drawings - Bosch MIC 612 Series Brochure & Specs

5 | MIC Series 612 Thermal Camera
Prepositions 99, each with 20-character title
Guard Tours Recorded Tours - two (2), total duration 15
minutes
Preset Tours – one (1), consisting of up to 99
scenes, consecutively, and one (1) customized up
to 99 scenes
Camera Setup / RS-485, Bilinx (coax)
Control
Communications Bosch (Bilinx, OSRD), Pelco D/P
Protocols Bosch OSRD requires use of converter device
(MIC-BP3 or MIC-BP4, sold separately).
(Bicom/Bilinx support on visible channel only.)
Washer Drive Optional washer kit (MIC-WKT Kit used with the
appropriate HAC-WAS washer pump)
Supported English, Czech*, Dutch, French, German, Italian,
Languages Portuguese, Russian*, Spanish
* Available with separate language upload

User Connections

Power Via composite cable (sold separately)
Control Data RS-485 (Twisted pair; Simplex, half and full
duplex operation via composite cable)
Biphase ±
(Optional; requires MIC Biphase module with
external power supply.)
Video Dual coaxial via composite cable (sold separately)
(Optical and optical/thermal cameras selectable.)
Alarm Inputs One (1) tamper input (eight (8) additional inputs
possible with optional alarm card)
Relay Outputs Two (2) relay outputs and washer relay output
only with optional alarm card
Alarm Tamper switch (ground connection)
Communication
Software CTFID software allows direct connection to a USB-
equipped PC via the MIC Series PSU over a full
duplex to provide access to all camera functions
and useful diagnostic tools.
Environmental
Ingress Protection IP68/NEMA 6P
Rating/Standard
Operating Temperature -40 °C to +60 °C (-40 °F to +140 °F)
(with heater)
Cold Start-up -40 °C (-40 °F)
Temperature (Requires 30-minute warm-up prior to PTZ
operations.)
Storage Temperature -40 °C to +70 °C (-40 °F to +158 °F)
Humidity 0-100%
Wind Load 240 kph (150 mph) (sustained)
(Estimated) Camera: 517 N (116 lbf)
Wall Mount: 130 N (29 lbf)
Effective Projected Area (EPA):
Camera: 0.192 m² / 2.06 ft²
Wall Mount: 0.0483 m² / 0.52 ft²
Vibration IEC 60068-2-6, Test Fc: Vibration
(operational), 10m/s² (1.0g)
Shock IEC 60068-2-27, Test Ea: Shock, 30g
IK Code IK10
Construction
Dimensions 267 mm x 452 mm x 201 mm
(W x H x D) (10.5 in. x 17.8 in. X 7.9 in.)
Weight 10.66 kg (23.50 lb)
(including 4-in. pitch circle diameter (PCD) base)
Viewing Window Tempered flat glass (optical) and germanium
covering (thermal)
Construction Machined aluminum
Material
Standard Colors Black (RAL9005), White (RAL9010);
Grey (RAL9006, available in specific regions)
Standard Finish Alodine 5200 surface treatment with powder coat
paint, sand finish
Window Wiper Standard, long-life silicone wiper
Heater Standard
Sunshield Optional; sold separately

Dimensional Drawings

mm
267.00
(10.5 in.)
mm
452.20
(17.8 in.)
mm
201.25
(7.9 in.)
mm
181.00
(7.13 in.)
mm
(in.)