Certifications And Approvals - Bosch MIC 612 Series Brochure & Specs

3 | MIC Series 612 Thermal Camera
camera, are sold separately. The camera can be
installed upright or inverted. No matter the installation
position, the camera will operate faultlessly.
Bosch's Configuration Tool for Imaging Devices
(CTFID) allows users to control the PTZ, change
camera settings, and update firmware from remote
locations without need for additional wiring.
The camera has advanced built-in diagnostics to
simplify service and minimize downtime. Using the On-
screen Display (OSD), a technician can quickly and
easily check critical parameters (such as internal
temperature) to verify that the camera is functioning
within acceptable operating limits.
Integrated long-life silicone wiper
Thanks to its integrated wiper, the MIC612 is able to
capture the highest possible quality image regardless
of the weather.

Certifications and approvals

Electromagnetic Complies with FCC part 15, ICES-003, and
Compatibility (EMC) CE regulations including EN 50130-4:
2011, EN 55022: 2010, EN 50121-4:
2006, EN 61000-3-2:2006 + A2:2009,
EN 61000-3-3:2008
Safety Complies with CE regulations, UL, EN, and
IEC standards 60950-1:2006 / A11:2009
= A1:2010 + A12:2011
Ingress Protection IP68, NEMA 6P
Rating/Standard
IK Code IK10
Installation/configuration notes
The table below identifies the resolution and the ther-
mal frame rate for the various model mixes of MIC612.
Model Resolution
MIC612TI- Standard
MIC612TF- Standard
MIC612HI- High
MIC612HF- High
Notice
Models of 25 Hz or 30 Hz require specific export
licenses--one license per customer--arranged prior
to the camera being built. MIC612TF- models re-
quire an export license from the U.S. Department
of Commerce. MIC612HF- models require an ex-
port license from the U.S. Department of State.
For more information, contact your local Bosch
Security Systems Customer Service Center.
Frame Rate
7.5Hz (NTSC)
8.3Hz (PAL)
25Hz (PAL)
30Hz (NTSC)
7.5Hz (NTSC)
8.3Hz (PAL)
25Hz (PAL)
30Hz (NTSC)
Technical specifications
Optical Camera Core, 36x Day/Night
Imager ¼ in.-type EXview HAD CCD (progressive scan)
Resolution/ PAL: Approximately 440,000; 752(H) x 582(V)
Effective NTSC: Approximately 380,000; 768(H) x 494(V)
Picture Elements
Lens 36x Zoom (3.4 mm to 122.4 mm)
F1.6 to F4.5
Zoom Movement 4.0 seconds (optical Wide to optical TELE)
Speed 6.2 seconds (optical wide to digital TELE)
Focus Automatic with manual override
Iris Automatic with manual override
Field of View 1.7º to 57.8º
(FOV)
Video Output 1.0 Vp-p, 75 Ohm
Gain Control Auto/Manual/Max.
(-3 dB to +28 dB, 2 dB steps)
Aperture Horizontal and vertical
Correction
Digital Zoom 12x
Horizontal 550 TVL (NTSC, PAL) typical
Resolution
Sensitivity ¹ 30 IRE
Day Mode
SensUp Off 0.66 lux
SensUp On 0.04 lux
(NTSC: 1/4s,
15X;
PAL 1/3s,
16.7X)
Night Mode
SensUp Off 0.104 lux
SensUp On 0.0052 lux
(NTSC: 1/4s,
15X;
PAL 1/3s,
16.7X)
Filter Automatic IR cut filter
Electronic 1/1 to 1/10,000 seconds (22 steps)
Shutter Speed
Wide Dynamic 92 dB (50 dB with WDR Off)
Range (WDR)
Signal-to-Noise >50 dB
Ratio (SNR)
White Balance 2000 K to 10,000 K
1 Unless otherwise stated, test conditions are: F1.6; shutter = NTSC 1/60s, PAL 1/50s; max
AGC
50 IRE
1.4 lux
0.1 lux
0.209 lux
0.0103 lux