Configuring The Camera - UTC Fire and Security TruVision Megapixel IP Camera Quick Start Manual

Configuration folder
Alarm parameters
Notification parameters
User management
HDD configuration
Upgrade remotely

Configuring the camera

The cameras are programmed through an on-screen (OSD) menu.
This main menu lets you set up the camera image to suit your
installation.
To access the main menu:
1. Open the browser and enter the camera IP address to connect to
the camera. Use the tool, IP Finder, enclosed on the CD to find the
IP address of the camera.
2. Enter your user name and password in the Login box and click OK.
The Web browser screen appears in live mode.
3. From the preset drop-down list in the PTZ control section of the
Web browser screen select preset number 95. The main menu
appears.
Refer to the User Manual for detailed information on configuring the
cameras.
EN 12
Description
Defines how the camera handles alarms
such as input type, notification of alarms,
and response schedules and duration.
Defines the methods to be used to alert for
internal errors in the system.
Defines who can use the camera, their
passwords and access privileges.
Defines how to format the SDD card used in
the camera.
Defines how to upgrade the camera's
firmware.
TruVision Megapixel IP Camera Quick Start Guide