Network And Streaming Configuration - UTC Fire and Security TruVision Megapixel IP Camera Quick Start Manual

3. PTZ controls. Lets you control a PTZ camera when connected
using RS-485 port. Also used to access main menu via "Preset 95"
to configure the camera.
4. Video image settings. Adjust video image settings such as
brightness, contrast, saturation, and hue.
5. Audio setting. Turn bi-directional audio on or off.
6. Video function. Lets you do the following:
Record live video.
Take a snapshot of the video.
Start live view.
7. Camera. View video and record video from this camera.

Network and streaming configuration

Once the camera hardware has been installed, the camera can then
be configured over the network.
In the camera browser screen click the
toolbar to get the configuration screens. There are 10 folders running
down the left side of the screen and each folder has a list of subfolders
which display the different configuration screens. See the Figure 5 on
page 11 for an example.
EN 10 TruVision Megapixel IP Camera Quick Start Guide
Config button in the menu