Sharing Media Content Over The Internet; Enabling Internet Access From The Media Server Page - Iomega StorCenter px12-400r User Manual

Sharing Media Content over the Internet

There are two methods for sharing media content on your Iomega device with anyone on the
internet. You can enable internet access on the Media Server page. Alternatively, you can enable
internet access by configuring your Iomega Personal

Enabling Internet Access from the Media Server Page

Note: You can only enable internet access from the Media Server page if you have already created
and configured a Personal
internet access option.
1. On the Media Server page, click
2. In the dialog box, check Enable internet access.
3. Click Apply to save your changes.
4. In the confirmation dialog box, check Check this box to continue.
5. Click OK to save your selection or click Cancel.
To access media content, internet users enter a non-secure IP address in their browser along with
the port number 9000 used to access the media server, for example, http://72.xx.xxx.104:9000,
where "x" is the IP value for your network. When a user enters this IP address, the Twonky Server
page on the Iomega device displays. Refer to the Support section of the Twonky Server page for
information on using the server. Iomega Link users can access media content directly from the
Iomega device. Refer to your Iomega Link documentation for details.
For additional information on enabling internet access, refer to
Limitations.
How do I...
scan for media content
enable media aggregation
stream music, movies, and pictures
Cloud. If a Personal Cloud is not set up, you do not see the Enable
Settings.
Cloud.
Media Services Capabilities and
Media Management
123