Service Mode Table; Dvd Self Diagnostic Function-Error Code - Panasonic DVD-K32GCS Service Manual

Dl4.5 mechanism series
Hide thumbs Also See for DVD-K32GCS:
Table of Contents

Advertisement

DVD-K32GCS / DVD-K32PL / DVD-K32PLA
8.2.

Service Mode Table 1

The service modes can be activated by pressing various button combination on the player and remote control unit. please carry out
your operation based on the remote control supplied with Panasonic DVD player of previous models.
Player buttons
Remote control unit buttons
PLAY
+
OPEN/CLOSE
8.3.

DVD Self Diagnostic Function-Error Code

Error Code
Error Content
U11
Focus error
H01
Tray loading error
H02
Spindle servo error
H03
Traverse servo error
H04
Tracking servo error
H05
Seek error
H07
Spindle motor drive
error
F893
FROM falsification
F895
Language area
abnormality
F897
initialize is not
completed
Note:
An error code will be canceled if a power supply is turned OFF.
*1: When FROM or Module P.C.B is replaced ,be sure to write the present value into the player as the initial setting of laser drive
current . (Refer to section 8.5 initial setting of laser drive current .)
Writing method :
a. Press the "PAUSE" button on the remote control unit while pressing the "PLAY" and "OPEN/CLOSE" buttons on the player.
b. Turn off the second power.
0
Displaying the UHF display F_ _ _
5
Jitter check, tilt adjustment
*Display shows J_xxx/yyy_zz
"yyy" and "zz" shown to the right have nothing to do with the jitter
value. "yyy" is the error counter, while "zz" isthe focus drive
value.
6
Checking the region numbers and broadcast system
7
Checking the program version
9
Lighting Confirmation Function of Display Tube
FUNCTION
Checking the laser drive current
PAUSE
Writing the laser drive current value after replacing the optical
pickup (do not use for anything other than optical pickup
replacement)
POWER
Initializing the DVD player
(restoring factory preset settings)
Additional error explanation
Focus coil, FE singal error
LD motor error, DV4.1 (IC8001) error
(Spindle servo, DV4.1 (IC8001) SP motor, CLV
servo error)
Traverse servo, DV4.1 (IC8001) , TRV motor
error
Tracking coil, DV4.1 (IC8001) error
TRV Motor, IC8251 error
SP motor current error, IC8251 error
Firmware soft error, DV4.1 (IC8001) error
Firm version agreement check for factory preset
setting failure prevention
Initialize completion check for factory preset
setting failure prevention
Application
Defect 1
TRV Unit
LD Motor
LD Motor
TRV Motor
TRV Unit
TRV Motor
TRV Unit
FROM
(*1)
(IC8651)
FROM
(*1)
(IC8651)
20
Note
Refer to section 8.3. Self-
Diagnosis Function (UHF
Display).
Check the IC8651 FLASH
ROM program.
Refer to section 8.1.
Optical Pickup
Replacement Procedure.
Refer to section 8.5.
Initializing the DVD
player.
Defect 2
Defect 3
Defect 4
DV4.1
(IC8001)
IC8251
DV4.1
(IC8001)
DV4.1
(IC8001)
DV4.1
(IC8001)
IC8251
IC8251
DV4.1
(IC8001)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvd-k32plaDvd-k32pl

Table of Contents