Removing Field-Replaceable Parts And Assemblies - Dell Inspiron 3800 System Reference Manual

Power Sources: Dell Inspiron 3800 System Reference
NOTICE: The ZIF connectors are fragile. To avoid damage, do not apply too much pressure to the movable part of
the connector.
To disconnect an interface cable from a ZIF connector, perform the following steps:
1. Insert a small flat-blade screwdriver behind the movable part of the connector.
2. Push gently sideways on the movable part of the connector until it releases the interface cable.
3. Grasp the interface cable and pull it out of the connector.
To reconnect an interface cable to a ZIF connector, perform the following steps:
1. Use a small flat-blade screwdriver to open the movable part of the ZIF connector.
2. Orient the end of the interface cable with the ZIF connector, and insert the end of the cable into the connector.
3. While holding the cable in place, close the ZIF connector.
4. To ensure a firm connection, make sure the ZIF connector is completely closed.

Removing Field-Replaceable Parts and Assemblies

Figure 5. Exploded View — Computer
file:///F|/Service%20Manuals/Dell/Inspiron/3800/r_r.htm (5 of 30) [2/28/2004 6:59:08 AM]
1 Movable part of connector (do not remove)
1 Modem (may not
apply to your
system)
2 System board
3 Bottom case
assembly