Toshiba D-R410KU Service Manual page 26

Toshiba d-r410ku dvd video recorder service manual
Hide thumbs Also See for D-R410KU:
Table of Contents

Advertisement

Message
This disc is protected and not
recordable.
Disc is full.
(No area for new recording)
You cannot record more than
99 titles on one disc. (The
maximum is 99.)
You cannot record more than
999 chapters on one disc.
(The maximum is 999.)
You cannot record on this as
Control Information is full.
You cannot record on this disc
as Power Calibration Area is
full.
This disc is already finalized.
Can not record on this disc.
You cannot record more than
49 titles on the disc.(The
maximum is 49.)
You cannot record more than
254 chapters on the disc.(The
maximum is 254.)
This program is not recordable
in +VR mode.
The disc has no recording
compatibility. Set "Make
Recording Compatible" to
"ON" to convert the disc.
If an error occurs during the timer recording, one of the following error numbers (40 to 42) or the above error
messages (error number: 1 to 39 and 43 to 46) is displayed on the recording menu after timer recording.
(Once the screen of the program line is exited, the program line for the error will be cleared.)
(No Error Message is displayed for the error No. 40 ~ 42.)
error number
A program with an error number is grayed out and asterisked on the timer programming list.
Message
Error message is not
displayed.
Solution
Release the disc protect
setting in the Disc Setting
menu.
Insert the recordable disc with
enough recording space.
Delete unnecessary titles.
Delete unnecessary chapters.
Insert a new disc.
Insert a new disc.
Release the finalizing for this
disc.
Repeat the same operation.
Delete unnecessary titles.
Delete unnecessary chapter
marks.
You cannot record copy
prohibited programs.
Set "Make Recording
Compatible" to "ON" to rewrite
the menu,after that you will
record to.
Ti
mer Programming
JAN / 5/08 12:14AM CH4 SP
SP (1:00)
JAN
AM
New Program
Solution
- Set the timer programming
correctly.
- Set the timer programming
before the start time.
Turn the power on and set the
clock correctly then set timer
programming again.
Insert the recordable disc.
Error
Error Description
No.
29
Disc Protected Disc.
30
No available recording space.
The 99 title limit has been reached.
31
(Video Format Disc)
The 99 title limit has been reached. (VR
32
Format Disc)
999 chapter limit has been reached. (VR
33
Format Disc)
No available recording space for Control
34
Information.
35
PCA is Full. (in REC start)
36
It is finalized. (Video Format Disc)
37
Access to Memory Area range outside.
38
Sector Address is wrong.
39
BUP writing error of chapter editing.
43
Its recording capacity has been reached.
44
The 254 chapter has been reached.
45
During the CGMS picture input.
Trying to record onto the +VR formatting
46
disc that had been recorded by the other
recorder.
FRI JAN/05 12:17AM
14AM
4
Error
Error Description
No.
- Some portion has not been recorded
because of program overlapping.
40
- Recording did not start at the start time.
41
Power failed
42
No disc when recording
1-9-2
Priority
6
10
-
-
-
-
4
8
-
-
-
9
10
12
7
Priority
-
-
-
E7K7AFIS

Advertisement

Table of Contents
loading

Table of Contents