Panasonic GP-MF622 Operating Instructions Manual page 8

CAUTION: CONNECT
THIS TO A DC 12V
q o
CLASS 2 POWER
w ! 0 i
SUPPLY ONLY.
e ! 1 !2 u
r t y
Pin No. Description
1 Ground
2 +12V IN
3 Ground for Video Out
4 Video Out
5 Ground for HD
6 HD IN
7 VD/V reset/V cont IN
8 Ground
9 No connection
10 No connection
11 No connection
12 Ground for VD
3. Pedestal Control
This controls the pedestal level from 0 mV to
100 mV.
4. Manual Gain Control
This controls the gain level from 0 to 6 dB.
5. Video Output Connector
This connector is used to connect with the
VIDEO IN connector of the monitor.
6. Switch 1 No.1 (1/ON)
This switch selects the Field or Frame
Accumulation.
ON : Field Accumulation
OFF: Frame Accumulation
7. Switch 1 No.2 (2/ON)
8. Switch 1 No.3 (3/ON)
9. Switch 1 No.4 (4/ON)
10. Switch 1 No.5 (5/ON)
These switches (Switch 1 No. 2, 3, 4, and 5)
are used to set the shutter speed. The shut-
ter speed changes according to the mode
which is set by the switch. (See following
pages to select mode by settings for Switch
2.)
- 6 -
1 ON
2 ON
3 ON
4 ON
5 ON