Schluter Systems DH E RS User Manual page 9

Night mode timer
The Night mode features a timer that automatically returns
to the Day mode after a selectable time period. This timer
allows the temporary use of a temperature set point. The
standard factory adjustment of the timer is 8 hours. With
this adjustment, the thermostat automatically returns to
Day mode 8 hours after being switched to the Night mode.
You can switch from the
affecting the timer adjustment.
For example, if you want a night temperature lower than the
day temperature, both Day/Night modes set points will first
have to be set at the desired temperatures. Before bedtime,
the Night mode temperature set point will be activated by
switching manually to the Night mode. The timer is set for the
duration of the night. The thermostat will automatically return
to the Day mode at the end of the night, and the Day mode
temperature set point, which is higher, will become effective
at this time.
Night mode timer adjustment procedure
1. First, switch to the Night mode by simultaneously pressing
down the + and - buttons and releasing them immediately.
2. From the Night mode, simultaneously press down the +
and - buttons for more than 3 seconds until the
starts to blink, indicating that the adjustment of the Night
mode timer is effective. The figures that replace the
mode temperature indicate the current adjustment of the
timer and ''hrs'' replaces the
3. If needed, adjust the timer by pressing down the + button
to increase the value, or the - button to decrease it. The
adjustment range is from 1 hour to 999 hours. To quickly
scroll through timer values, press and hold down the
button.
4. When the adjustment is completed, release the buttons
and wait for 5 seconds to exit the adjustment function. The
thermostat will then return to the Night mode.
mode to the
mode temperature.
mode without
icon
9