Nokia X Dual SIM User Manual page 5

2. If the battery is in the phone, lift it out.
3. Push the SIM into the SIM1 slot, contact area face down.
To remove the SIM, pull the card out.
4. Push the second SIM into the SIM2 slot with the contact area face down.
Both SIM cards are available at the same time when the device is not being used, but while one SIM
card is active, for example, making a call, the other may be unavailable.
5. Push the memory card into the memory card slot with the contact area face down.
To remove the memory card, pull it out.
Important: Do not remove the memory card when an app is using it. Doing so may damage the
memory card and the device and corrupt data stored on the card.
6. Line up the battery contacts, and put the battery in.
7. Replace the back cover.
8. To switch on, press and hold the power key.
Note: Switch the device off and disconnect the charger and any other device before removing
any covers. Avoid touching electronic components while changing any covers. Always store and
use the device with any covers attached.
© 2014 Nokia. All rights reserved.
5