JVC MX-G70 Service Manual page 9

Removing the main board
Prior to performing the following procedure, remove
the metal cover, the CD changer mechanism
assembly, the rear panel and the tuner board.
1. Disconnect the card wires from connector CN870,
CN871 and CN315 on the main board.
2. Disconnect the flat wires from connector CN704 and
CN706 on the amplifier board.
3. Remove the screw H attaching the main board on
the right side of the body.
4. Disconnect connector CN211 and CN212 on the
main board from the regulator board.
Removing the speaker terminal board
Prior to performing the following procedure, remove
the metal cover, the CD changer mechanism
assembly and the rear panel.
REFERENCE: It is not necessary to remove the main
board.
1. Disconnect connector CN217 on the speaker
terminal board from the regulator board.
(See Fig.16 and 17)
(See Fig.18)
Main board
CN870
CN871
CN315
Amplifier board
CN704,CN706
Fig.16
Front panel assembly
Plastic rivet
Regulator board
Fig.17
Regulator board
Fig.18
MX-G70
Front panel assembly
Main board
CN211
H
CN212
Speaker terminal board
CN217
1-9