Advertisement
How to Set Alarms
The e-pill MeDose PARKINSON Vibrating 12 Alarm Watch and Auto-Reset Count-Down
Interval Timer offers the patient Two (2) Different Ways of helping to remember to take
medications on a daily schedule.
No Alarm Reset Required: When the alarm "goes off", simply take your medication(s) as
instructed by your healthcare professional. You will be reminded by a 20 Seconds long;
Vibrating Alarm, Beep (sound) Alarm or BOTH alarms at the same time (see TIME
section). No extra steps required by the patient – this e-pill Medication Reminder Alarm
Watch will continue on the pre-set FIXED DAILY or VARYING DAILY schedule.
Once the e-pill MeDose Vibrating 12 Alarm Watch has been set, it will repeat the alarms
every day at the same time (ALM) or with a certain interval (CDT). When the vibration /
sound get weak, you need to replace the CR2032 battery (see section below).
Fixed Daily Schedule: For PD
patients starting their day at the
SAME TIME, use 1 - 12 DAILY
Auto-Reset ALARMS (use ALM
setting 1 thru 12). This feature is
used
by
patients
medication(s) on the same schedule
each day (TRUE Alarm Timer).
Varying Daily Schedule: For PD
patients starting their day at a
DIFFERENT TIME each day, use
the
Auto-Reset
INTERVAL TIMER (use CDT /
REP setting). This feature is used
by patients taking medication(s) at
different times each day.
taking
Count-Down
Advertisement
